Cooling during laser procedures
It's not enough just to know how to remove hairs with a diode laser or use neodymium to remove tattoos. It is also necessary to do this nontraumatically. Cooling will help us with this. There are several options. Let's go!
There is a popular problem, it happened with almost every master: the client left with normal skin, and after a couple of hours there are bubbles or small blisters. Burning. But everything was normal, when he left. What is it?
This is overheating of tissues. Therefore, we must enter the cooling stage. In this case, we have built-in airflow cooling system in neodymium Melsytech Super Full laser, reusable cold packs and, for example, a special device for cooling by air flow (up to -43°C!) Zimmer. Even carried out in an experiment - it's somewhere in 5 minutes can freeze water to ice in one flow?
But we are all a bit in love with lasers, so when it was possible not just to look through the characteristics, but also to go to the factory for the production of a diode laser for epilation, there was no thought at all. In all these laboratories and conveyors, I was convinced of the unique quality of our new friend - the Magic One diode laser.
This is overheating of tissues. Therefore, we must enter the cooling stage. In this case, we have built-in airflow cooling system in neodymium Melsytech Super Full laser, reusable cold packs and, for example, a special device for cooling by air flow (up to -43°C!) Zimmer. Even carried out in an experiment - it's somewhere in 5 minutes can freeze water to ice in one flow?
But we are all a bit in love with lasers, so when it was possible not just to look through the characteristics, but also to go to the factory for the production of a diode laser for epilation, there was no thought at all. In all these laboratories and conveyors, I was convinced of the unique quality of our new friend - the Magic One diode laser.
Important for owners of clinics with a medical license. All these techs from the list are fully certified.
What drives me in, for example, The Magic One - I saw good lasers that cope with cooling and were cold, but this one is COVERED BY INE.
Why is it important to cool not only when removing tattoos, but also during epilation?
I think we all know the principle of laser hair removal. The laser waves must penetrate the hair follicle to destroy the melanin in it, and hence the very life cycle of the hair. Why do I pronounce the truisms? So that you remember that the follicle can be located at different depths, and melanin is not only in the hairs, but also in the skin. So when exposed to hairs, the epidermis may also heat up.
Answer yourself to the question: do we need a burn at the client's skin?
Answer yourself to the question: do we need a burn at the client's skin?
About the interface
Everything is thought out, intuitively clear, the time of getting used to the menu in the work is just minimal. We can choose the client's gender, removal location, skin type by Fitzpatrick, hair type and all this really changes the settings! Because on many lasers (and I've seen a lot in 10 years), these parameters are given simply for the species: you can change a lot, but the fluence is all the same. That's why I was pleasantly surprised by this model.
Important details, as a result:
- Where the other manipula is simply cold, here it is covered with frost in just a few minutes.
- Super-understandable interface
- Ability to connect all three wavelengths for epilatior
I once conducted an experiment and just imagined how the laser would work without cooling. I took a piece of paper and "shot" at him from the maniple a little. What can I say? The sheet is very unlucky, no one would like to be burned through.
Summarizing, I say that with all laser procedures, cooling is an extremely important stage. With such a high power, with such parameters it is very important to save the epidermis from powerful damage! Especially since you, the master, are responsible for everything that happens on the procedure and for its consequences.
What will your client receive: epilation or a burn, smooth skin or scars?
I'm always for quality, because that's what real pros do, if you think so too, then you and I will go one way!
Summarizing, I say that with all laser procedures, cooling is an extremely important stage. With such a high power, with such parameters it is very important to save the epidermis from powerful damage! Especially since you, the master, are responsible for everything that happens on the procedure and for its consequences.
What will your client receive: epilation or a burn, smooth skin or scars?
I'm always for quality, because that's what real pros do, if you think so too, then you and I will go one way!
If you want to become an expert in the field of safe laser removal of tattoos and permanent make-up, apply for participation in the next online course
Get 1st video lesson for free. Fill the form, click the button and get a video link via e-mail.
Educational license No. 6558 of January 17, 2017.
Teacher Vitaly Mikryukov, PhD of Medicine
By pressing the button, you consent to the processing of personal data
Teacher Vitaly Mikryukov, PhD of Medicine
By pressing the button, you consent to the processing of personal data
Subscribe to our pages and catch the freshest releases of new broadcasts. During them you can ask questions and get answers from specialists in the real time
➡️ https://www.periscope.tv/vitalymikrukov
➡️ https://www.instagram.com/doctormikrukov
➡️ https://www.facebook.com/vitalymikrukov
➡️ https://ok.ru/vitaly.mikryukov
➡️ https://vk.com/vitalymikrukov